Influence of carbonation on the low-temperature consolidation by Spark Plasma Sintering of carbonated calcium phosphate bioceramics

Calcium phosphates (CaP) such as biomimetic nanocrystalline apatite or amorphous calcium phosphate are hydrated bioactive compounds particularly suitable for bone repair applications due to their similarity with bone mineral. However, their consolidation in ceramic parts deserves special attention as they are thermodynamically metastable and can decompose into less bioactive phases upon heating. Adapted strategies are needed to obtain bulk bioceramics. Spark Plasma Sintering (SPS) has been shown to allow cold sintering of such compounds at temperatures like 150 °C while preserving the hydrated character and nanosized dimensions of the precursor powders. To this date, however, the role of the degree of carbonation of these precursors on the densification of CO₃-bearing CaP compounds via SPS has not been explored despite the natural carbonation of bone. In this work, several carbonated CaP hydrated compounds were prepared and consolidated by SPS and the characteristics of the obtained ceramics was scrutinized with respect to the starting powders. Two carbonation routes were carried out: via volume carbonation during powder synthesis or via subsequent surface ion exchange. All samples tested led to apatitic compounds after SPS, including amorphous CaP. We show that the degree of carbonation negatively affects the densification rate and propose possible hypotheses explaining this behavior. Evolution in the nature of the carbonate sites (apatitic A-, B-types and labile surface carbonates) before and after SPS is also noticed and commented. The consolidation of such compounds is however proven possible, and gives rise to bone-like apatitic compounds with great potential as bioactive resorbable ceramics for bone regeneration.     

Synthesis method of novel Gd2O3@Fe3O4 nanocomposite modified by dextrose capping agent

In current study, gadolinium oxide was heterogeneously formed on the surface of iron oxide nanoparticles and further modified with dextrose capping agent to be used in biomedical applications, especially for contrast enhancement in MR images. First, two types of iron oxide nanoparticles were prepared at 25 and 80 ^°C via simple coprecipitaion method. Then, gadolinium oxide nanoparticles were synthesized through a consecutive precipitation process on previously formed iron oxide seeds in an aqueous media and subsequent annealing at 300 ^°C. Finally, dextrose was used as capping agent to stabilize nanocomposites in a colloidal suspension. X-ray diffraction (XRD), Scanning and Transmission electron microscopy, Dynamic Laser Scattering (DLS), Fourier-Transform Infrared Spectroscopy (FTIR), and Magnetometery (VSM) techniques were employed for nanocomposites investigation and MTT-assay method used for viability assessment of colloidal samples. Measurements based on Scherrer equation from XRD patterns showed that increasing coprecipitation temperature resulted bigger iron oxide crystallites. The iron oxide crystallite size was increased from 15.1 to 28.1 nm. Precipitation process led to gadolinium oxide formation with 30.7 and 38.8 nm crystallite sizes, respectively. TEM images revealed that iron oxide agglomerates were encapsulated in gadolinium oxide surroundings. Hydrodynamic size of the coated nanoparticles with dextrose was 208 and 247 nm. In VSM examinations, nanocomposites did not display coercive field and the saturation magnetization was 1.93 emu/g. MTT-assay results showed 80% viability in 285 μg nanocomposites containing 96.9 μg [Fe] and 11.4 μg [Gd].     

剂油比对煤焦油沥青质加氢过程的影响

以中低温煤焦油沥青质为原料,采用NiMoW/γ-Al_2O_3商业催化剂,在反应温度380℃、反应压力8 MPa和反应时间1.5 h条件下,分别在不同剂油质量比(1∶25、1∶20、1∶15、1∶10)条件下进行加氢实验,通过采用元素分析、FT-IR、XRD、~1H-NMR和XPS等分析表征手段,考察不同剂油质量比对中低温煤焦油沥青质加氢转化过程的影响。结果表明,随着剂油质量比的增加,沥青质转化率提高,加氢产物分布也发生大幅变化,沥青质和芳香分轻质化转化为饱和分。但随着剂油质量比的进一步提高,同时也发生了更多的裂化反应和缩合反应,剂油质量比在合适范围能够很好地起到加氢轻质化且抑制结焦的效果。     

净水水处理剂中有害杂质在水中残留物分析与风险评估

与欧盟和美国标准相比,我国硫酸铝和硫酸铵标准缺少对水处理剂中有害杂质镍、锑、硒、银、吡啶、氰化物、六价铬的检测;次氯酸钠缺少对水处理剂中有害杂质汞、铬、镉、铁、镍、锑、硒、银、六价铬的检测。结合某市2019年上半年13个水厂出厂水和原水的检测数据,剔除了5项始终低于检出限的有害杂质指标,以及2项出厂水浓度低于原水浓度的有害杂质指标。建议该市硫酸铝和硫酸铵的检测项目可以在原有国标基础上增加锑、硒;次氯酸钠可以增加汞、锑、硒。     

合成二甲氧基甲烷技术研究进展

二甲氧基甲烷作为用途广泛的化工原料,其合成技术在不断创新与发展。根据反应原料和工艺流程的不同对二甲氧基甲烷合成技术进行了概述与简评,该技术包含甲醇与甲醛催化缩合制备二甲氧基甲烷、甲醇与多聚甲醛反应制备二甲氧基甲烷、甲醇一步法制取二甲氧基甲烷、离子液体电催化氧化甲醇制取二甲氧基甲烷、二甲醚氧化生成二甲氧基甲烷、二溴甲烷合成二甲氧基甲烷、合成气制备二甲氧基甲烷、甲醇与二氧化碳反应制取二甲氧基甲烷等。醇醛缩合制备二甲氧基甲烷仍是当前主流的生产工艺,甲醇一步法制取二甲氧基甲烷工艺因在环境和投资上有优势而被广泛研究,是最具工业化前景的新技术,该技术尚需突破的是兼具氧化还原性与酸性的双功能催化剂。     

Double Variational Binding—(SMILES) Conformational Analysis by Docking Mechanisms for Anti-HIV Pyrimidine Ligands

Variational quantitative binding–conformational analysis for a series of anti-HIV pyrimidine-based ligands is advanced at the individual molecular level. This was achieved by employing ligand-receptor docking algorithms for each molecule in the 1,3-disubstituted uracil derivative series that was studied. Such computational algorithms were employed for analyzing both genuine molecular cases and their simplified molecular input line entry system (SMILES) transformations, which were created via the controlled breaking of chemical bonds, so as to generate the longest SMILES molecular chain (LoSMoC) and Branching SMILES (BraS) conformations. The study identified the most active anti-HIV molecules, and analyzed their special and relevant bonding fragments (chemical alerts), and the recorded energetic and geometric docking results (i.e., binding and affinity energies, and the surface area and volume of bonding, respectively). Clear computational evidence was also produced concerning the ligand-receptor pocket binding efficacies of the LoSMoc and BraS conformation types, thus confirming their earlier presence (as suggested by variational quantitative structure-activity relationship, variational-QSAR) as active intermediates for the molecule-to-cell transduction process.     

化工冶金学家陈家镛

1958年中国科学院化工冶金研究所(现过程工程研究所)的创建,与建国初期的国家经济发展和国防建设的需求紧密相关。1956年陈家镛受到世界著名冶金学家叶渚沛的邀请,到正在筹建中的化工冶金研究所工作。作为国内该领域开拓者和学术带头人,陈家镛院士的学术经历是本文主线。以他带领同事们开展湿法冶金研究为案例,分析了国家重大战略需求与科学技术研究之间的关系。重点介绍了他在冶金、化工、材料等研究领域做出的重要学术贡献,以及将代表性科研成果经过中间试验应用于实际生产、解决企业所面临的技术难题的情况。藉此反映了以过程工程研究所为代表的国立科研机构,围绕国家重大战略需求开展科技攻坚的历程与成果。     

Site-Specific PEGylation of Therapeutic Proteins

The use of proteins as therapeutics has a long history and is becoming ever more common in modern medicine. While the number of protein-based drugs is growing every year, significant problems still remain with their use. Among these problems are rapid degradation and excretion from patients, thus requiring frequent dosing, which in turn increases the chances for an immunological response as well as increasing the cost of therapy. One of the main strategies to alleviate these problems is to link a polyethylene glycol (PEG) group to the protein of interest. This process, called PEGylation, has grown dramatically in recent years resulting in several approved drugs. Installing a single PEG chain at a defined site in a protein is challenging. Recently, there is has been considerable research into various methods for the site-specific PEGylation of proteins. This review seeks to summarize that work and provide background and context for how site-specific PEGylation is performed. After introducing the topic of site-specific PEGylation, recent developments using chemical methods are described. That is followed by a more extensive discussion of bioorthogonal reactions and enzymatic labeling.     

Study of metal assisted anisotropic chemical etching of silicon for high aspect ratio in crystalline silicon solar cells

Textured surface is commonly used to enhance the efficiency of silicon solar cells by reducing the overall reflectance and improving the light scattering. In this study, a comparison between isotropic and anisotropic etching methods was investigated. The deep funnel shaped structures with high aspect ratio are proposed for better light trapping with low reflectance in crystalline silicon solar cells. The anisotropic metal assisted chemical etching (MACE) was used to form the funnel shaped structures with various aspect ratios. The funnel shaped structures showed an average reflectance of 14.75% while it was 15.77% for the pillar shaped structures. The average reflectance was further reduced to 9.49% using deep funnel shaped structures with an aspect ratio of 1:1.18. The deep funnel shaped structures with high aspect ratios can be employed for high performance of crystalline silicon solar cells.